Combine TORUM 770 

Power Stream header guarantees improved performance by reducing losses and optimal crop gain. This header proved in practice that due to its original cutterbar with a planetary drive minimizes shattering losses and ensures consistent uniform feeding whatever harvesting conditions may be. The reel hydraulic drive featuring a synchrodrive automatically adjusts the reel speed to match the ground speed.

In a rotary combine with stationary concave the concave area is not used completely, therefore possible performance indicators are reduced. Except for incomplete use
of the concave area, when harvesting damp crops, rice the upper part of the concave
is clotted (the so called dead zone). The rotating concave allows using 360°
of the concave surface, prevents formation of dead zones and rotor clogging.
Besides, the concave has three threshing sections allowing
to set a threshing gap in one section. Thanks to this the mass
is threshed three times with one round of the rotor unlike
the single threshing in conventional rotor units. The same principle allows setting the increased threshing clearances.
No additional adjustment of concave is required depending
on crop harvesting conditions: for crops from barley to wheat the threshing clearance is set within the range of 16–20 mm.

The correspondent frontal equipment is required for such high-efficient combines. Everybody knows that the harvesting starts from reaper. Therefore, the selection of right decision represents the most important aspect when selecting the combine.

The reaper hydraulic drive

allows to adjust its rpm without gears providing optimal
and uniform mass feeding for the high productivity purpose. It is easy and reliable mechanism with minimal adjustments.

Cutting apparatus

operates smoothly, precisely and without wear. High cutting rpm and increased travel of knives increase the cut quality and, respectively, the harvesting productivity, especially
in adverse conditions. The knives are attached with bolts, what considerably reduces the time of their replacement.
In order to harvest the laid crops on uneven soils, the stem-lifters, which preliminary lift the stems fromground,
are used to reduce the losses (included into basic set).

Electro-hydraulic soil relief-copying system

(included into standard set) allows to increase the harvesting efficiency due to increase of operating speed, and reduce the losses behind the reaper. Three operating modes, automatictransferring the adapter into transporting position and programmablepreset copying settings make easier the harvestingprocess. The electronics will care about the relief complexity.

The large diameter worm

prevents the winding of high-stem crops. Pins between
the worm threads arranged along the coverage width promote the mass feeding even when harvesting peas and very low barley (for reapers with electrical-hydraulic copying). There are grooves on the pins allowing their careful braking in case of getting the rocks.

Reaper rpm and combine drive speed synchronization system

makes easier the combine operator’s work, and reduces the requirements to his qualification. As the result, increased harvesting productivity and reduced losses. Connecting areas of the reaper beams and rake elements are reliably protected from winding of long-stem plants.

TORUM uses the engine L6, Cummins X12 (520 h.p., Stage V). Powerful and compact engine has good specific fuel rate and torque backup up to 20%.

The air cleaning system uses air intake mesh with forced rotation (from the hydraulic motor), which significantly reduces the complexity of maintenance.

The rotor is driven by the planetary CVT with hydraulic control – a unique hydro-mechanical device, which combines the advantages of both types of drives: smooth and accurate speed control, high bearing force and reliable beltless transmission.